How To Setup Rockspace Wifi Range Extender
A wifi extender is used to increase the network coverage area for your wifi network. The extender is the best setup to increase the range of your wifi network at your home. If you don’t know how to set up the extender then read this article carefully and follow the instructions step by step:-
Getting Started
The WPS button is now seen in both the modem routers and the range extenders. They create a 2 minutes window in which the 2 devices can connect with each other without the wifi password. This is the fastest option to get internet signals at your home. You will go there re.rockspace.local and follow the steps carefully.
Connect The Wifi Range Extender
Firstly You have to go to the extender app and then go to the wifi panel of settings on mobile phones or tablets. 0606 Hyperoptic is our normal router and you can see that it transfers the wifi on both 2.4GHz and 5GHz bands. You can also see that the range of the extender is also transferred to its own signal. If you use the WPS button, you may automatically connect to the range of the wifi extender.
Wifi Having The Dual Band
Now connect our smartphones to the range extender. Many of the manufacturers will tell you to enter a password or an email address in order to create a private account.
The rockspace wifi extender setup has shown all the other wifi networks that have been detected. It will approximately start with the 2.4GHz band and you can see that our router network will be seen at the top of the list.
Combine The Wifi
This setup asks you to enter the password for your router’s 2.4GHz wifi network. This range extender allows connecting its own 2.4GHz wifi signal to a 2.4GHz signal to the main router.
You will need to repeat this process with the 5GHz band as well. When you have done this process then the range extender is linked to the router or the wifi bands. In our rooms, computers and mobiles have a poor wifi connection they can now link to our router via range extender.
Names Of The Network
At the start of the setup process, The range extender of the wifi is also called the rockspace extender setup on both 2.4GHz and 5GHz bands. But now the router is linked with the range extender. This setup changes the name of the range extender wifi to use the same 0606 hyperoptic as that of the wifi network.
Set Up The Location Of The Wifi Extender
Now, take a look at the range extender setup. In a second, We have got a range of extender positions about half between the main router or the home office. where the signal tends to be a small weak. This setup tells that there is a good connection between the router and the range extender. You can still move your extender away from the router without losing any connection problems.
Move Out The Range Of The Extender
If you take a U-turn to our smartphone wifi settings panel then you can see there are two distinct networks. The main router is on both the 2.4GHz and 5GHz bands and the range extender network also has the 2.4GHz or 5GHz bands. You have already entered the router’s wifi password into the setup. So you have no need to do this again
Finish Up The Wifi Extender
Switching between the network is not a big problem for a single device such as a laptop; they can spend most of the time in the office or in the room. They have a small chore with smartphones and tablets that they can move around a lot more.
Some of the more expensive range extenders can eliminate this problem by merging their own wifi network from your main router.
This is also known as roaming and it allows you to switch automatically between the router and the range extender. It can depend on which one is closer and gives the fastest wifi signal.
Conclusion
Most people are facing the problem of the set up of extenders. If you want to solve this problem then read this article and follow the instructions carefully. Stay tuned for further updates.